EPS夾芯板以彩鋼板為表層，阻燃聚苯乙烯泡沫板為芯材，聚氨酯為涂層劑。 面板由連續加熱和壓縮形成，同步縮放和切割。 在聚苯乙烯泡沫板和涂料的結合下，EPS面板能夠承受重載，因此其抗壓強度約為100kPa。
EPS三明治板規格
EPS夾心板：
鋼板厚度：0.3mm〜0.7mm;
三明治厚度：50mm〜250mm;
可用寬度：950mm，1150mm;
可用長度：通過定制。
EPS三明治板物理和力學性能
|
項目 |
單位 |
性能指標 | ||
|
Ⅰ |
Ⅱ |
Ⅲ | ||
|
表觀密度≤ |
kg/m2 |
15.0 |
20.0 |
30.0 |
|
壓縮強度（10％變形下的壓縮應力） ≥ |
kPa |
60 |
100 |
150 |
|
導熱系數≤ |
w/(m.k) |
0.041 |
0.041 |
0.041 |
|
水蒸氣滲透系數≤ |
ng/Pa.m.s |
9.5 |
4.5 |
4.5 |
|
吸水能力≤ |
% |
6 |
4 |
2 |
|
氧指數≥ |
% |
30 |
30 |
30 |
注：Ⅰ級不承重。 Ⅱ類承受負荷。 Ⅲ類負荷重。
|
密度(kg/m3) |
導熱系數W /（m.k） [平均溫度（70±5）℃] |
有機物含量（％） | 非易燃 | 最高溫度 |
| |||
|
密度 |
限制偏差 |
| ||||||
|
優勢 |
一級 | 合格 |
| |||||
|
80 |
±10 |
±15 |
±20 |
≤0.044 |
≤4.0 |
A Grade |
400 |
|
|
100 120 |
<0.046 |
600 |
||||||
|
150 160 |
≤0.048 |
|||||||
|
項目 |
單位 |
性能指標 | |||||
|
Ⅰ |
Ⅱ | ||||||
|
A |
B |
A |
B | ||||
|
密度 ≥ |
kg/m2 |
30 |
30 |
30 |
30 | ||
|
壓縮強度（10％變形下的壓縮應力） ≥ |
kPa |
100 |
100 |
100 |
150 | ||
|
導熱系數≤ |
w/(m.k) |
0.022 |
0.027 |
0.022 |
0.027 | ||
|
水蒸氣滲透系數（23 + 2）℃/ 0％至85％RH≤ |
ng/Pa.m.s |
6.5 |
6.5 | ||||
|
吸水能力≤ |
% |
4 |
3 | ||||
|
易燃 |
Ⅰ級 |
垂直燃燒 |
平均燃燒時間（S） |
30 |
30 | ||
|
平均燃燒強度（毫米） |
250 |
250 | |||||
| Ⅱ級 |
水平燃燒 |
平均燃燒時間（S） |
90 |
90 | |||
|
平均燃燒強度（毫米） |
50 |
50 | |||||
Characteristics:
1)The technology is advanced: Adopt the automatic and continuous equipment, all the main processes are controlled by computer, the quality can reach the industry standard in China. The fireproofing Grade: B3.
2) The weight is light: The weight of per square meter sandwich panel is 10~12 kg. The performance in heat reserve and heat insulate is excellent: thermal conductivity λ=0.032 KW/m.h.℃.
3) Good rigidity: Because the core materials are shaped, then heat and press them, stick to the upper and the lower surface steel sheet. When the panels are shaped, it has good integrative performance; and also there are wave shapes on the surface of the roof panel, they are stronger than the other same kind materials. The sandwich panel is fixed by the connection and the purlin, then the whole integrative rigidity will be enhanced higher, the whole roof and the wall panels will be enhanced to work well.
4)The way of fixation should be tight well and reasonable, the roof panels adopt the M6 self-trapping screw to fix to the purlin, the self-trapping screw will be set on the wave position of the roof panel in order to avoid leaking. And the self-trapping screw adopts the special constitution, for example the screw adds the whorl constitution and the screw cap add the plastic to protect, in order to reduce the possibility of leaking.
5) The way of fixation shall be reasonable; the panel will buckle each other, and then avoid the leaking from the roof panel and save the fittings.
6) Protect from scratching: We could use the polythene film on the sandwich panel when they are processed, in order to prevent the surface of the steel from scratching when install and transport.
公眾號二維碼
